NEWS RELEASE

Editor’s note: Links to high-resolution images for download appear at the end of this release.

David Ruth
713-348-6327
david@rice.edu

Mike Williams
713-348-6728
mikewilliams@rice.edu

Brittle pals bond for flexible electronics

Rice University lab leads discovery of surprising dielectric insulator for next-gen devices

HOUSTON – (May 10, 2019) – Mixing two brittle materials to make something flexible defies common sense, but Rice University scientists have done just that to make a novel dielectric.

Dielectrics are the polarized insulators in batteries and other devices that separate positive and negative electrodes. Without them, there are no electronic devices.

The most common dielectrics contain brittle metal oxides and are less adaptable as devices shrink or get more flexible. So Rice scientists developed a dielectric poised to solve the problem for manufacturers who wish to create next-generation flexible electronics.

An electron microscope image of the flexible dielectric alloy created at Rice University shows a layered structure of sulfur and selenium and a lack of voids. The material shows promise as a separator for next-generation flexible electronics. Courtesy of the Ajayan Research Group

Until now, manufacturers had to choose between brittle dielectrics with a high constant (K) – the material’s ability to be polarized by an electric field – or flexible low-K versions.

The material created at Rice has both. Rice materials scientist Pulickel Ajayan and graduate student and lead author Sandhya Susarla combined sulfur and selenium to synthesize a dielectric that retains the best properties of high-K ceramics and polymers and low-K rubber and polyvinyl.

“We were surprised by this discovery because neither sulfur or selenium have any dielectric properties or have a ductile nature,” Susarla said. “When we combined them, we started playing with the material and found out that mechanically, it behaved as a compliant polymer.”

Their results appear in Science Advances.

Susarla said the new material is cheap, scalable, lightweight and elastic, and has the electronic properties necessary to be a player in the emerging field of flexible technologies. Given that it’s so simple, why had nobody thought of it before?

“There are a few reports in early 1900s on the synthesis of these materials and their viscoelastic properties,” Susarla said. “But since no one was interested in flexible semiconductors back then, their dielectric properties were ignored.”

Their method of manufacture began with a bit of elbow grease, as the researchers mixed sulfur and selenide powders in a mortar and pestle. Melting them together at 572 degrees Fahrenheit in an inert argon atmosphere allowed them to form the dense semicrystalline alloy they saw in electron microscope images. Computational models helped them characterize the material’s molecular structure.

Then they squished it.

Sandhya Susarla

Compression tests in a lab press crushed pure sulfur and selenium crystals, but the new alloy recovered 96% of its previous form when the same load was lifted.

Susarla said the repulsion of dipole moments in the selenium matrix are most responsible for the material’s ability to recover. “There are some attractive forces in the sulfur and selenium rings that make the material stable, and there are repulsive forces that make the material incompressible,” she said.

Susarla said the material is stable, abundant and easy to fabricate, and should be simple to adapt for micro- and nanoscale electronics. “Since the viscosity of this material is high, forming thin films can be a little difficult,” she said. “That is the current challenge we are trying to deal with.”

Chandra Sekhar Tiwary, a former Rice research scientist and now an assistant professor at the Indian Institute of Technology, Kharagpur, is co-corresponding author of the paper. Co-authors are Rice alumni Thierry Tsafack and Peter Samora Owuor, research assistants Anand Puthirath and BenMaan Jawdat, research scientist Babu Ganguli, graduate students Amey Apte and David Tam, Pengcheng Dai, a professor of physics and astronomy, and Jun Lou, a professor of materials science and nanoengineering; Jordan Hachtel, Juan Carlos Idrobo and Andrew Lupini of Oak Ridge National Laboratory, Oak Ridge, Tennessee; Martin Hilario of the Air Force Research Laboratory, Albuquerque, New Mexico; Albert Lerma of Leidos, Inc., of Albuquerque; Hector Calderon of the University of Houston; Francisco Robles Hernandez of the National Polytechnic Institute of Mexico, and Tong Li and Bingqing Wei of the University of Delaware.

Ajayan is chair of Rice’s Department of Materials Science and NanoEngineering, the Benjamin M. and Mary Greenwood Anderson Professor in Engineering and a professor of chemistry.

The Department of Energy Office of Science, Basic Energy Sciences, supported the research.

-30-

Read the abstract at https://advances.sciencemag.org/content/5/5/eaau9785

Follow Rice News and Media Relations via Twitter @RiceUNews.

Related materials:

Ajayan Research Group: https://ajayan.rice.edu

Rice Materials Science and NanoEngineering: https://msne.rice.edu

Brown School of Engineering: https://engineering.rice.edu

Images for download:

https://news2.rice.edu/files/2019/05/0613_ALLOY-1a-WEB.jpg

An electron microscope image of the flexible dielectric alloy created at Rice University shows a layered structure of sulfur and selenium and a lack of voids. The material shows promise as a separator for next-generation flexible electronics. (Credit: Ajayan Research Group/Rice University)

https://news2.rice.edu/files/2019/05/0613_ALLOY-2a-WEB-2.jpg

Rice University graduate student Sandhya Susarla led a study to create a flexible dielectric material that has all the electrical properties of the brittle materials in use today. (Credit: Courtesy of Sandhya Susarla)

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation’s top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 3,962 undergraduates and 3,027 graduate students, Rice’s undergraduate student-to-faculty ratio is just under 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice is ranked No. 1 for lots of race/class interaction and No. 2 for quality of life by the Princeton Review. Rice is also rated as a best value among private universities by Kiplinger’s Personal Finance.