SUMMARY: Rice researchers crush their custom silicon sponges to make battery anodes that outperform those in current batteries and should easily scale up for manufacturing.

Editor’s note: Because of Hurricane Sandy, Nature’s servers have been down this week and no papers have been posted to Scientific Reports since Monday. Please check the Scientific Reports website for updates and contact us for a copy of the paper.

Links to high-resolution images for download appear at the end of this release

David Ruth
713-348-6327
david@rice.edu

Mike Williams
713-348-6728
mikewilliams@rice.edu

Rice team boosts silicon-based batteries

‘Crushed’ porous silicon anodes show dramatic increase in charge-discharge cycles 

HOUSTON – (Nov. 1, 2012) – Researchers at Rice University have refined silicon-based lithium-ion technology by literally crushing their previous work to make a high-capacity, long-lived and low-cost anode material with serious commercial potential for rechargeable lithium batteries.

The team led by Rice engineer Sibani Lisa Biswal and research scientist Madhuri Thakur reported in Nature’s open access journal Scientific Reports on the creation of a silicon-based anode, the negative electrode of a battery, that easily achieves 600 charge-discharge cycles at 1,000 milliamp hours per gram (mAh/g). This is a significant improvement over the 350 mAh/g capacity of current graphite anodes.

That puts it squarely in the realm of next-generation battery technology competing to lower the cost and extend the range of electric vehicles.

The new work by Rice through the long-running Lockheed Martin Advanced Nanotechnology Center of Excellence at Rice (LANCER) is the next and biggest logical step since the partners began investigating batteries four years ago.

“We previously reported on making porous silicon films,” said Biswal, an assistant professor of chemical and biomolecular engineering. “We have been looking to move away from the film geometry to something that can be easily transferred into the current battery manufacturing process. Madhuri crushed the porous silicon film to form porous silicon particulates, a powder that can be easily adopted by battery manufacturers.”

Silicon can hold 10 times more lithium ions than the graphite commonly used in anodes today. But there’s a problem: Silicon more than triples its volume when completely lithiated. When repeated, this swelling and shrinking causes silicon to quickly break down.

Many researchers have been working on strategies to make silicon more suitable for battery use. Scientists at Rice and elsewhere have created nanostructured silicon with a high surface-to-volume ratio, which allows the silicon to accommodate a larger volume expansion. Biswal, lead author Thakur and co-author Michael Wong, a professor of chemical and biomolecular engineering and of chemistry, tried the opposite approach; they etched pores into silicon wafers to give the material room to expand. By earlier this year, they had advanced to making sponge-like silicon films that showed even more promise.

Even those films presented a problem for manufacturers, Thakur said. “They’re not easy to handle and would be difficult to scale up.” But by crushing the sponges into porous grains, the material gains far more surface area to soak up lithium ions.

Biswal held up two vials, one holding 50 milligrams of crushed silicon, the other 50 milligrams of porous silicon powder. The difference between them was obvious. “The surface area of our material is 46 square meters per gram,” she said. “Crushed silicon is 0.71 square meters per gram. So our particles have more than 50 times the surface area, which gives us a larger surface area for lithiation, with plenty of void space to accommodate expansion.” The porous silicon powder is mixed with a binder, pyrolyzed polyacrylonitrile (PAN), which offers conductive and structural support.

“As a powder, they can be used in large-scale roll-to-roll processing by industry,” Thakur said. “The material is very simple to synthesize, cost-effective and gives high energy capacity over a large number of cycles.”

“This work shows just how important and useful it is to be able to control the internal pores and the external size of the silicon particles,” Wong said.

In recent experiments, Thakur designed a half-cell battery with lithium metal as the counter electrode and fixed the capacity of the anode to 1,000 mAh/g. That was only about a third of its theoretical capacity, but three times better than current batteries. The anodes lasted 600 charge-discharge cycles at a C/2 rate (two hours to charge and two hours to discharge). Another anode continues to cycle at a C/5 rate (five-hour charge and five-hour discharge) and is expected to remain at 1,000 mAh/g for more than 700 cycles.

“This successful endeavor between Rice University and Lockheed Martin Mission Systems and Sensors will provide a significant improvement in battery technology by the development of this inexpensive manufacturing technique for silicon anode material,” said Steven Sinsabaugh, a Lockheed Martin Fellow who works with LANCER and a co-author of the paper along with Lockheed Martin researcher Mark Isaacson. “We’re truly excited about this breakthrough and are looking forward to transitioning this technology to the commercial marketplace.”

“The next step will be to test this porous silicon powder as an anode in a full battery,” Biswal said. “Our preliminary results with cobalt oxide as the cathode appear very promising, and there are new cathode materials that we’d like to investigate.”

-30-

Read the abstract at http://www.nature.com/srep/2012/121108/srep00795/full/srep00795.html

This news release can be found online at https://news2.rice.edu.

Follow Rice News and Media Relations via Twitter @RiceUNews

Related materials:

Biswal Group: http://www.ruf.rice.edu/~biswalab/Biswal_Research_Group/Welcome.html

Lockheed Martin Advanced Nanotechnology Center of Excellence at Rice University: http://lancer.rice.edu/

Images for download:

https://news2.rice.edu/files/2012/10/ANODE-1-WEB.jpg

Rice University Professor Sibani Lisa Biswal holds two vials, the left with 50 milligrams of crushed silicon, the right with 50 milligrams of her lab’s porous silicon powder. The treated silicon, with more than 50 times the surface area, holds up to 10 times its weight in lithium in a form that may lead to robust, powerful lithium-ion batteries. (Credit: Jeff Fitlow/Rice University)

https://news2.rice.edu/files/2012/10/ANODE-2-WEB.jpg

Rice University and Lockheed Martin have created a porous silicon powder that may lead to robust, powerful lithium-ion batteries. Fifty milligrams of the treated powder in the right vial has much more surface area than an identical weight of crushed silicon in the left vial. (Credit: Jeff Fitlow/Rice University)

https://news2.rice.edu/files/2012/10/ANODE-3-WEB.jpg

Rice University researchers Madhuri Thakur, left, and Sibani Lisa Biswal are testing anodes made of treated porous silicon that can be spread on a current collector and holds up to 10 times the amount of lithium than graphite anodes in current lithium-ion batteries. The robust anodes have achieved more than 600 charge-discharge cycles. (Credit: Jeff Fitlow/Rice University)

https://news2.rice.edu/files/2012/10/ANODE-4-WEB.jpg

A half-cell battery that incorporates a porous silicon developed at Rice University has achieved more than 600 charge-discharge cycles in the lab. The work holds promise for next-generation batteries for electric vehicles. (Credit: Jeff Fitlow/Rice University)

https://news2.rice.edu/files/2012/10/ANODE-6-WEB.jpg

Porous silicon powder mixed with pyrolyzed polyacrylonitrile is the basis for a robust anode for lithium-ion batteries. Anodes developed with the powder at Rice University have achieved more than 600 charge-discharge cycles in the lab. (Credit: Madhuri Thakur/Rice University)

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation’s top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 3,708 undergraduates and 2,374 graduate students, Rice’s undergraduate student-to-faculty ratio is 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice has been ranked No. 1 for best quality of life multiple times by the Princeton Review and No. 4 for “best value” among private universities by Kiplinger’s Personal Finance. To read “What they’re saying about Rice,” go to www.rice.edu/nationalmedia/Rice.pdf.